7 1/2" Cottle Hammer 30mm diameter

Controlled Handling for Precise Instrument Work

The 7 1/2" Cottle Hammer 30mm diameter is a surgical hammer designed for delivering controlled taps during instrument-assisted work. Its 7.5" overall length provides a practical balance of reach and hand control, while the 30mm diameter identifies the hammer’s substantial working profile. This configuration supports consistent handling when a compatible osteotome, chisel, or similar instrument requires measured impact. The straightforward design helps maintain a focused workflow by providing a dedicated striking instrument for tasks that call for deliberate force rather than improvised alternatives.

Use Cases

• Deliver controlled taps to compatible osteotomes, chisels, or similar instruments.
• Support instrument-assisted work where measured impact and steady handling are required.
• Use the 7.5" length to maintain practical hand positioning during striking tasks.
• Incorporate the 30mm-diameter hammer into workflows requiring a dedicated surgical hammer.

Specifications

Care & Handling

• Clean the hammer according to facility protocols and the applicable instrument-care instructions.
• Inspect the hammer before and after use for visible damage, deformation, or surface changes.
• Handle and store the instrument to prevent impact damage and contact with unsuitable surfaces.
• Follow the applicable IFU and facility procedures for any reprocessing or storage requirements.

General use; follow facility protocols.